How to Open Your Aftershock PC Nimbus Case
Complexity: Easy | Time: 5 min
A quick guide to assist you with removing the side panel from your Nimbus case!
Steps to Open Your Aftershock PC Nimbus Case
Locate the Screw
The screw should be located under the front of the glass panel. Loosen the screw to release the panel from the case.
Pull the Panel
With two fingers, gently pull from the bottom of the panel outwards, then carefully lift the whole panel away from the PC.
Removing the Foam
After carefully removing the packing foam from inside the PC, store it in a safe place in case the PC requires transport in the future.
Re-installing the Panel
When re-installing the panel, make sure the four guides on the inside of the panel are aligned with the hotels in the chassis.
Locking the Panel in Place
Gently push the panel to lock it back in place then re-tighten the screw under the front, and you're all done!
What's Next?
If you need further assistance or have any questions, feel free to reach out for additional support - we're always happy to help!
