Reset & Resync RGB Hub
Watch Video
Send to Email
Send to PhoneIf your RGB fans aren't responding correctly, resetting and resyncing the RGB hub can help. Follow this guide to reset and resync your RGB hub.
Why Do I Need to Resync & Reset the Hub?
The PC should arrive with the appropriate RGB apps configured and the hub all synced up. It can occur, however, that when other apps are installed, it causes a clash and desync. Resyncing can help resolve this issue.
Steps to Reset & Resync Your RGB Hub
Remove the Side Panel
- Loosen the screws at the back of your PC and slide off the back panel. The exact method may vary depending on your chassis.
- Note: Your PC will need to be powered on for the hub to sync.
Remove the Side Panel
- Loosen the screws at the back of your PC and slide off the back panel. The exact method may vary depending on your chassis.
- Note: Your PC will need to be powered on for the hub to sync.
Locate the RGB Hub and Bridging Pins
- Locate your RGB hub and bridging pins
- Please note depending on your build, there may be two hubs.
Locate the RGB Hub and Bridging Pins
- Locate your RGB hub and bridging pins
- Please note depending on your build, there may be two hubs.
Bridge the Pins
- Hold the metal tip of a screwdriver on the two pins for 1-2 seconds while the PC is on.
- Bridging the pins for 5 or more seconds may switch the RGB off. If this happens, bridge the pins for another 5-10 seconds to turn the RGB back on.
Bridge the Pins
- Hold the metal tip of a screwdriver on the two pins for 1-2 seconds while the PC is on.
- Bridging the pins for 5 or more seconds may switch the RGB off. If this happens, bridge the pins for another 5-10 seconds to turn the RGB back on.
Check for Changes
- You will see the fan lights change to sync up and match the color you've pre-selected through your motherboard RGB software (e.g., Armoury Crate, RGB Fusion, or MSI Centre).
Check for Changes
- You will see the fan lights change to sync up and match the color you've pre-selected through your motherboard RGB software (e.g., Armoury Crate, RGB Fusion, or MSI Centre).
What's Next?
After resyncing the RGB hub, monitor your PC to ensure the RGB lighting is functioning correctly. If issues persist, consider further troubleshooting or contacting support for additional assistance.
For more in-depth troubleshooting and maintenance, consider the following guides:
- How to Check Internal Cables (Easy)
- How to Perform a Power Cycle (Easy)
If you need further assistance or have any questions, feel free to reach out for additional support - we're always happy to help!
Did this fix your issue?
